Tire Supplies for Car Dealerships & Auto Repair Shops

Types of Tire Supplies

TPMS Tools, Sensors & Service Kits

The AVT41 wireless TPMS tool reads and clears TPMS codes, retrieves sensor IDs, and supports manual relearns. Programmable sensors are available with aluminum clamp-in or EPDM rubber snap-in valves, while U1 and U2 service kits provide replacement components for compatible sensor assemblies.

Snap-In Rubber Valve Stems

Snap-in rubber valve stems serve passenger car, light truck, and ATV/UTV tubeless wheels. Options include standard passenger stems and higher pressure TR600HP and TR801XHP models, with fitment determined by rim hole size and pressure requirements.

Clamp-In Truck Valve Stems

Brass clamp-in truck valve stems include high-temperature cores and EPDM grommets for commercial service. The selection includes straight styles and nickel-plated TR544D and TR545D stems with a 60° bend for 9.7 mm aluminum rim holes.

Valve Cores & Valve Caps

Replacement options include nickel-plated cores, short high-temperature TRC-1 cores, black plastic caps, and TPMS caps with seals. V2B Double Seal Gator Caps let technicians check pressure and add air without removing the cap.

Tire Repair Patches & Plug Inserts

Feather edge, universal, and radial patches provide options for different repair applications. Patch-plug combination units include gray vulcanizing gum, while butyl rubber string inserts are available for steel-belted radials; select materials according to the tire and repair procedure.

Tire Repair Chemicals

Bead and rim sealer, inner liner sealer, vulcanizing cement, and buffing solution support different stages of tire service. These flammable products ship by ground only, so include them in routine supply planning.

Tire Mounting Paste & Lubricant

Wax-based mounting paste is available for low profile tires, run-flat tires, and alloy wheels. Ready-to-use liquid mounting lubricant dries quickly, and both options contain rust inhibitors.

Lead-Free Wheel Weights

Zinc clip-on weights include P, MC, and FN series for different wheel applications. Steel adhesive weights come in strips and rolls, with silver, black, and low-profile options for stick-on balancing.

Tire Storage Bags & Tire Labels

Gusseted tire storage bags come in standard, large, and XL sizes in self-dispensing boxes and resist shop chemicals and grease. Weatherproof tire advertising labels provide an easy on/off option for pricing new and used tires on display.

Choosing the Right Tire Supplies

The right supplies depend on the vehicles your dealership or repair shop services and the work scheduled in each bay.

Choose TPMS tools, sensors, and service kits if you need:

• TPMS diagnostics and manual relearns
• Replacement programmable sensors
• Service components for tire changes

Choose snap-in rubber valve stems if you need:

• Passenger car tubeless wheel service
• Light truck or ATV/UTV applications
• 0.453" or 0.625" fitment options

Choose clamp-in truck valve stems if you need:

• Commercial truck valve replacement
• Brass stems with EPDM grommets
• 60° bent stems for compatible aluminum rims

Choose valve cores and caps if you need:

• Routine valve component replacement
• TPMS caps with seals
• Gator caps for fleet pressure checks

Choose tire repair patches and plug inserts if you need:

• Inside-the-tire repair materials
• Patch-plug combination units
• Butyl rubber string inserts

Choose tire repair chemicals if you need:

• Bead and rim sealing
• Inner liner sealer and vulcanizing cement
• Buffing solution for repair preparation

Choose tire mounting paste and lubricant if you need:

• Mounting and demounting supplies
• Paste for low profile and run-flat tires
• Ready-to-use liquid with rust inhibitors

Choose lead-free wheel weights if you need:

• Clip-on weights for steel wheels
• MC or FN weights for compatible alloys
• Adhesive strips or rolls

Choose tire storage bags and labels if you need:

• Bags for seasonal tire storage
• Packaging for removed take-offs
• Weatherproof tire pricing labels

Why Dealerships Stock Their Own Tire Supplies

A tire appointment can stall over a missing valve stem, service kit, or wheel weight. Keeping routine consumables in the dealership helps technicians finish scheduled work without waiting on parts runs.

Dealership service departments and repair shops stock tire supplies to:

• Keep service bays moving through scheduled appointments
• Make replacement valve stems and TPMS service kits available at every tire installation
• Support consistent repair materials and procedures
• Reduce avoidable return visits for unresolved complaints
• Protect customer satisfaction and CSI scores

Build valve replacement and TPMS component service into the tire installation checklist, following the applicable service procedure.

Clip-On vs. Adhesive Wheel Weights

Clip-on wheel weights attach to a compatible wheel flange. P-Series zinc weights are for steel wheels, MC-Series coated weights are for domestic alloy wheels, and FN-Series coated weights are for import alloy applications including Acura, Honda, Infiniti, Lexus, Nissan, and Toyota. Match the series to the wheel application.

Adhesive weights attach to the wheel surface for stick-on balancing. Steel strips and rolls provide alternatives for alloy wheels, with silver, black, and low-profile options. Quikstik weights include a powder-coated finish and finger-lift film.

We carry only lead-free wheel weights in this collection. California and New York prohibit lead wheel weights, and Washington requires lead weights to be replaced with environmentally preferred alternatives during covered tire replacement or balancing work. Stocking zinc and steel options supports a consistent lead-free inventory.

Snap-In vs. Clamp-In Valve Stems

Rubber snap-in stems serve passenger and light truck tubeless wheels. Most listed models fit 0.453" rim holes; TR415 and TR801XHP fit 0.625" holes. Standard passenger stems are rated at 65 PSI, TR600HP at 80 PSI, and TR801XHP at 100 PSI.

Brass clamp-in stems provide options for commercial and higher pressure applications. The truck selection includes stems for 5/8" holes, while TR544D and TR545D use a 60° bend, fit 9.7 mm aluminum rim holes, and are rated at 200 PSI. Confirm the individual stem's fitment and pressure rating before installation.

Frequently Asked Questions

What tire supplies does a dealership service department need?

A dealership service department needs valve stems, cores and caps, TPMS service components, repair materials, mounting lubricant, and wheel weights matched to its work. Shops handling seasonal changes or tire displays may also need storage bags and advertising labels.

Should valve stems be replaced with every new tire?

Plan to replace conventional rubber valve stems when installing new tires. For TPMS assemblies, use the appropriate service kit and follow the applicable sensor service procedure rather than automatically replacing a functioning sensor.

What size valve stem fits a 0.453" rim hole?

Listed snap-in options for 0.453" rim holes include TR412, TR413, TR414, TR418, and TR600HP. Select the model for the application and pressure requirement; TR415 and TR801XHP instead fit 0.625" holes.

What's the difference between P, MC and FN series wheel weights?

P-Series weights are for steel wheels, MC-Series coated weights are for domestic alloy wheels, and FN-Series coated weights are for import alloy wheels. FN applications include Acura, Honda, Infiniti, Lexus, Nissan, and Toyota; confirm the correct series for the wheel.

Are your wheel weights lead-free?

Yes. The zinc clip-on wheel weights and steel adhesive wheel weights in this collection are lead-free, with options for compatible steel and alloy wheels.

What does a TPMS service kit include?

The listed universal TPMS service kits include a nut, washer, grommets, valve core, and cap. U1 kits serve compatible metal valve and sensor applications, while U2 kits serve compatible rubber snap-in valves.

Can tire repair chemicals ship by air?

No. The flammable tire repair chemicals in this collection ship by ground only, including bead and rim sealer, inner liner sealer, vulcanizing cement, and buffing solution.

Why Dealerships Choose US Auto Supplies

Since 2017, more than 10,000 dealerships and service centers have trusted US Auto Supplies for automotive service supplies, dealership merchandising products, and vehicle protection solutions.

Whether you're operating a dealership service lane, independent repair shop, quick lube center, tire shop, or fleet service center, our selection of TPMS products, valve components, repair materials, mounting lubricants, wheel weights, and storage supplies helps support daily tire service.

Browse our complete selection of tire supplies, or contact our team if you'd like assistance choosing the right products for your shop's workflow.